Stage 6 has found its way onto the Scootertronics website through our race series as scooter high performance parts that have done as well on the track and in the streets of Thurmont MD. The Stage 6 iron and aluim cylinder kits do their job well and keep cool to keep the performance top notch. These matched with the Yasuni exhaust and the Stage 6 Replica Exhaust do a fine job with torque and top end. So far our customers agree as well as our newest racer Rob Scholl. Clutches and bell have been added from Stage 6 also. Naraku has a carb set up I am using on what of our scooters to get some top end out of which is a four stroke using a 24mm Naraku Carb with manifold spacer/riser plus larger manifold for a GY6 150 and it really does the trick.
Top Posts & Pages
Top Information for Scooter Upgrades
Past Info
Written By Michael Milstead
Scoot Performance
Stage6 PWK Carbs 21mm - 24mm are scooter racing carbs that extend your HP to the upper limits by adding more air plus alot more fuel to burn. A good racing cylinder kit should be used with proper ports as well as a large racing exhaust. Simple 70cc iron kits with a smaller type exhaust like a ZX 50 will prevent the best performance plus could damage your engine from over heating.
I have noticed you don’t monetize your website, don’t waste
your traffic, you can earn extra cash every month because you’ve got
high quality content. If you want to know how to make extra bucks, search for: best adsense alternative Wrastain’s tools